PRODUCTS
1. towers and pylons
2. fat sacs™ and valves
3. ropes and handles
4. Barefoot Booms and Equipment



TOWERS
5. pro x series tower extension NEW!!
6. pro x series tower
7. pro x series rolled cage
8. monkey bar
PYLONS
9. fly high
10. x-pole
11. quad pod
12. v-drive pylon
13. pro ski pylon
14. bass boat pylon
15. pro deck master pylon
16. ski tow hitch
ACCESSORIES
17. pro x series board rack
18. board rack
19. pro x series rag top
20. rope guide
21. delron height adjuster
22. delron pro ski swivel
23. board pads
24. cable pad
25. pylon case

The new Pro X Series Tower Extension (patent pending) is the most badass product to hit the market. It fits all towers and allows riders to go bigger and land softer. It also helps you learn new tricks at slower speeds which will increase your confidence while reducing the punishment of crashing. Trying to land that first raley? Slow the boat to 18 mph and give it a rip. It also folds down entirely and can remain attached while your tower is collapsed, so there is no need to remove it prior to parking your boat on the lift.

Check the part numbers for proper fitting

W2927 fits towers 2" in diameter or less
W2931 fits towers 2.125"-2.5" in diameter
W2932 fits MasterCraft X-Star and X-80 towers

The Pro X Series Tower is completely universal and the only one constructed of stainless steel making it the strongest and most durable tower on the market. The Quick Release pins are user friendly and make stowing and setup of the tower a simple task. Just pull six pins and the tower folds down entirely allowing an easier fit into your garage and lift. This tower offers exclusive adjustable overhead crossbar engineering which locks it in place and makes it as rigid as a factory installed pylon (it won't loosen up ove time). The crossbars of the tower act as an integrated board rack that will store anything from a slalom ski to a wake surf board.

TIP: Keep a small tube of clear silicone grease in the boat and apply a light coat to the hitch pins on a regular basis. This will help with installation and removal of the pins.

The Pro X Series Cage is a simple yet effective design. It’s made of high quality 2” and 2.5” stainless steel and adjusts to fit any boat. Mount the arms to the front or back of the boat to give it a distinct look. It’s fully collapsible as well.

TIP: Keep a small tube of clear silicone grease in the boat and apply a light coat to the hitch pins on a regular basis. This will help with installation and removal of the pins.

The Monkey Bar is a version of the Pro X Series Cage which uses our traditional cable system attached to the bow of the boat for stability. Don’t be fooled by it’s simplicity, this tower is easy to install and performs like any other at a fraction of the cost.

TIP: Keep a small tube of clear silicone grease in the boat and apply a light coat to the hitch pins on a regular basis. This will help with installation and removal of the pins.

The original Fly High is still the only high quality stainless steel pylon on the market. It splits into two pieces for easy storage in a ski locker or bow of your boat. It’s the only pylon offering a delron swivel at the top and at pylon height. The Fly High’s superior strength and absolute safety comes from our dual stainless steel cable system.

The X-Pole is all aluminum, anodized black and made to fit 2.5” pylons. This monster is similar to the stainless steel Fly High but is one piece instead of two. It also has a poly carbonate sleeve inside to protect your factory pylon.

The Quad Pod Pylon is designed for riders who have boats without a factory installed pylon. It offers the same height advantage as other extended pylons and towers while the four braces make it extremely strong and safe to use.

The V-Drive Pylon is designed specifically for installation on v-drive boats. It utilizes two support arms to which make for a rigid design. This is the answer v-drive owners are looking for if they don’t want to install a tower.

The Pro Ski Pylon comes in two forms, fixed and adjustable. The fixed version of the pylon is 45” tall while the adjustable version can be set to a height from 34”-58”. (W411 - adjustable height / W412 - fixed height)

The Bass Boat Pylon is designed to utilize the seat mount of your bass boat. It can be quickly installed and removed and has two telescoping support arms that provide stability.

The Deck Master Pylon was designed to be fitted to deck boats. It’s design is simple yet effective, and the pylon itself installs in seconds.

The Ski Tow Hitch can be mounted to the transom of boats.

The Pro X Series Board Rack is designed to fit any tower or pylon and comes with arm extensions to accommodate wake surf boards. The arms are spring-loaded allowing you to stow and retrieve your stick with a quickness. (W2906 - 2” or less O.D. pylons and towers / W2907 - greater than 2” O.D. pylons and towers)

The original Board Rack fits any pylon, the Monkey Bar and Cage towers. This heavy duty rack conveniently stores up to 4 boards. Keep from having to step over your equipment by stowing it up off the floor. (W906 for 2.5” pylons / W906-3 for 3” pylons)

The Pro X Series Rag Top is the perfect adjustable bimini that you can attach to the factory pylon or directly to any extended pylon. Once it’s removed, simply pull the quick release pins to quickly fold it into thirds, thus making it easy to transport or store. Available in assorted colors.

The Rope Guide can be used with all Fly High towers and pylons with the exception of the X-Pole. It quickly attaches to the swivel at the top of a tower or pylon and keeps the rope out of your way. There is no need for someone hold the rope after a rider falls to keep it from hanging up on a board rack or the rear platform. The Rope Guide is simple, but saves the headache of a tangled line.

The Adjustable Delron Swivel attaches to any pylon allowing you to adjust the height of the attachment point for the rope. It’s convenient to have if your teaching someone to ride and they are intimidated by the height of the extended pylon. (W2902 for 2.5” pylons / W2902-3 for 3” pylons)

The Delron Swivel is a compact design and can be permanently mounted to any boat or jet ski.

The Pro X Series Tower ships with black board pads for it's integrated board rack, but you can customize the look of your tower with these pads.

• back to top
• home